Blessing

Another design with the Cheery Lynn Designs lattice

over DP.  Love those lattices.

On top of that you  have two Spellbinders labels. 

The bottom label has been textruized

and the top label has the phrase printed on it.

The phrase was created by myself in PSP X.

The flowers are some of a type that I seldom use,

they are silk.  A beige pearl is in the

center of each flower and three

smaller pearls are positioned on the phrase.

Flourishes and leaves complete the design.

The Code of the West

A perfect card for the man in your life.

The card base is parchment that has the edges

"burned" with a sponging of black ink.

The corrugated piece of a card board box

was cut with a label die from Spellbinders.

It was then distressed with dark brown ink

with it's edges sponged with black ink.

The cowboy image was lightly colored and

cut out with a Sizzix die.  It was lightly sponged with dark

brown ink and the again with black ink.

The phrase was done in Word, die cut,

the corners punched and

it was sponged with brown and black inks.

The cowboy hat is a Sizzlets western set.

I colored the hat band to make it stand out 

a little more.

Encourage One Another

This is a white card base with a very pale green lattice attache.

Two different Spellbinders labels were used

for the computer generated scripture

and the K and Company sticker.

The edges of the labels were lightly sponged with a

light tan ink.

Pearls were attached for added elegance.

Nothing Hidden

Cream and burgundy are the colors used on this design.

The cream card base is the foundation.

A cream 4 x 5.25 inch piece of card stock was

textured in an embossing folder, layered over burgundy

and the burgundy was trimmed to a narrow border.

A subtle piece of Victorian themed DP was

layered over burgundy that had been

punched to a decorative border.

The scripture was designed in PSP X using various fonts.

It was cut out with a Spellbinders oval die.

The edges were sponged with burgundy ink.

Glorify the Lord

Very simple and basic design.

The card base is totally covered with a floral DP.

One of the Spellbinders cardmaker dies was used to cut 

the lovely frame.

The scripture was cut out with Spellbinders

Beaded Ovals die and the edges sponged with

burgundy ink.

That's it!  

Enjoy Donna, I know you were waiting for a new

design to show up on the blog.

My Strength

The LORD is my strength and song.

The Cheery Lynn Designs lattice die cut is

done in a very pale green card stock

over a Karen Foster DP.

The scripture was done in Paint Shop Pro X

and was designed by me.

It was die cut using a Spellbinders Label die.

The edges of it and the label die cut under it

are both sponged with purple ink.

 Rhinestones with a purple hue and

a K & Company sticker

are the embellishments.

Ascribe to the Lord

Psalm 29:2 is a beautiful reminder of what a wonderful

God we serve.

The design begins with a plain white card base.

It has been totally covered by an old Karen Foster DP.

Over this is a light pink lattice die cut made

from a Cheery Lyn Designs die.

The two larger ovals are Spellbinders.

The long narrow one has been textured with an 

embossing folder and mounted on a long narrow

scalloped oval out of a slightly darker pink.

The scripture has been done in PSP X,

cut in an oval and mounted on another

slightly larger pink oval.

Three small pearls are attached to the far right

side of the oval.

K and Company is the make of the oval

3-D tulip sticker.

A Birthday Card

A very simple birthday card with some glitz.

The sparkly turquoise and browns band is make 

from white glue and various embossing powders and

Pearlex.  Simply spread a coating of white glue, the 

cheapest you can find will work just fine, and dab on

various embossing powders, Pearex powder, glitter

or anything shiny and pretty that will stick in the glue.

Now heat with your heat gun. 

You will note that the thicker the glue

the more bubbles and texture you will get.

Since this is a messy process I make up a bunch at once 

and pull them out to use as needed.

I used brown card stock in the layering

and for the EK Success punched border.

Fear Not

One of my favorite scriptures and scripture songs.

This card begins with a plain white card base.

Karen Foster DP is attached to the card base with

a Cherry Lynn Designs lattice in a very pale green over that.

The scripture has been created in PSP X

and cut out with a Spellbinders Label die.

The edges have been sponged with a purple ink

The flowers and leaves have been punched  using

Punch Bunch punches, shaped with a stylus and

glitter glue was used for the center of the flowers

 after they were attached.

Simple Cheerful Cards

 A plain white card base is the beginning of this design.

The next step is to cut another piece of card stock

that is 4 x 5.25 inches.

You will now be working on this piece of card stock.

 The bright colored stripes are done with washi tape.

This is my first experience with washi tape and

I think I am already addicted.

The phrase is computer generated and cut

with Spellbinders Labels dies.

Two of them are mounted on punched ovals, 

with one of the ovals having a dot of bright orange

glitter glue on either side.

The butterflies are punched from the same paper that

is under the phrase.  A pearl pen was used to

give a nicely raised center to each of the butterflies.

I have to say that I really really like the pearl pens.

Unlike the glitter glue, the product stays raised 

and does not shrink when dried.

The final step was to attach cut up strips of
egg carton (the flat part only) to the back of the

4 x 5.25 inch piece of card stock (that has all the pretties on it)

and glue to the card base.

Glorify the Lord

A burgundy and cream color scheme is 

very pleasing to the eye.

Begin with a cream card base.

I cut a piece of cream card stock to 4 x 5.25 inches

and created texture with an embossing folder (ef).

This was attached to a piece of burgundy paper 

and trimmed to a narrow border with layering rulers.

An EK Success border punch was used to  create the

border of the Paper Studio Mirabella stack DP.

The scripture is Luke 1:46-47.

It has been created in Paint Shop Pro X.

It was cut with a Spellbinders Label die

and the edges sponged with burgundy ink.

Wolf on Leather

This stunning stamp is from Bear Creek Rubber.  

I don't know if they are even in business anymore as

I got the stamp a long time ago.

The first step to stamping on leather is to dust it with talc.

Now stamp the image with black pigment ink and

apply fineline black embossing powder.

Heat the powder until it has all become shiny

and is melted to the leather.

This was fairly thick leather so the circular die cut 

did not cut all the way through, but it was 

relatively simple to finish cutting with a scissors

as the die cut leaves a very nice line for one to follow when cutting.

The edges of the circle were sponged with sepia ink and the

eyes of the wolf were color yellow with a Tombow marker.

A piece of corrugated cardboard was torn in a circle.

The entire circle was sponged with sepia ink with the

edges receiving an extra heavy dose.

The decorative bar on the right was made with

Fiskar decorative scissors and punches.

The dark brown base was cut with the scissors

and the little medallions were punched and

then glued together.

The card base also had the edges sponged with

sepia ink.

Old Truck

 In my wanderings as a agricultural enumerator for

Nebraska Agricultural Statistics Service I see a lot

on the back roads of western Nebraska.

I found this old truck on an abandoned farmstead several

miles off any maintained road.  It makes a perfect card

for a man.

The card base is from DCWV Old World stack.  

I am not sure where I got the stamp.

The edge of the card base, picture and phrase

all have edges sponged in black ink.

One picture has the old fashioned corners and

the bottom one has the edges rounded.

Both phrases were created in PSP X

by myself.

Scrap Flower

There was a project that used several different

coordinating papers.  Now I am a paperaholic of the first order.

I just hate to throw away those scraps.

 

I saw a card similar to this one and had the Cuttlebug

die for single flower petals and so set to work.

The petals are put in backwards, with

the rounded edge to the center.

A Man Card

When I think of cards for my husband I think of cards 

with a definite western flavor.

This card has a cream base card that has the front cover with

faux snake skin that I  made.

The punched border is from dark brown card stock

A piece of card board box had one sides outer layer

carefully removed, it was then die cut with a

Spellbinders Label die, had dark brown ink

sponged over the top to catch the high portions

and then more heavily inked on the outer edge with

dark brown and black.

The phrase has the corners punched and the edges sponged 

with brown and then black inks.  It has been centered on the card boards.

The horse shoes are die cuts from and old Sizzixlets set.

Valentines Day cards

 Layers, embossing folders and die cutting

are the basic techniques used in these cards.

 The phrases are created in Paint Shop Pro X,

copied to Word and sized to fit my Spellbinders dies.

Because I Care - One

This phrase is one of my favorites because it can cover

so many occasions.  I just write Happy Birthday, Get Well,

With Sympathy or whatever on the inside.

I began the design with a plain white card base

that has the edges lightly sponged in maroon ink.

Maroon paper is used as a narrow border under the

Victorian DP  and under the oval die cut

computer generated phrase.

An EK Success punch was used for the

maroon trellis type border.

The DP (design paper) was cut to

5.25 x 4 inches, attached to the

maroon card stock and trimmed to a 

narrow border with layering rulers.

Indian

The Indian image is from a company called Ink Blocks.

I don't know if they even exist anymore.

There were a number of very interesting and 

stunning Indian images that were done for the

company by one artist.

This was stamped with a dark pigment ink

and embossed with a rust metallic powder.

It was cut in a circle with the indention on

one side done by hand with a scissors.

A wild turkey feather is showing through the indention.

This is then mounted on a dark brown circle.

The border is an EK Success border punch.

The parchment beige card base has

the edges sponged with dark brown ink.

A Little Western Flavor

Steps to create the longhorn skull medallion.

1. Use a crackle stamp cream colored leather with archival brown ink.

2. Stamp skull with black pigment ink, emboss with fine line black powder.

    The beads on the horns have been attache with beading thread.

3. Using a die cut or a coluzzle template, cut around the image.  Your die will

    probably not cut all the way through the leather if it is really thick like this

    leather was.  I had to finish the cut with a scissors.

4. Sponge and archival dark brown or sepia ink around the edges of the leather.

5. Attach the round leather image to a dark brown card stock, trim with a decorative scissors.

6. Tear out a circle from a piece of card board that has the corrugations exposes.

7. Heavily sponge with dark brown or sepia ink.

8. Attach skull layers to corrugated card board.

9. Attach end of a wild turkey feather under card board.

 

Steps to create snake skin.

1. Snake skin look is done by first splotching light and medium brown

    archival inks on a white or cream card stock.

2. Emboss with a snake skin embossing plate or folder.  This is a Fiskars embossing plate.

3. Lightly run a sponge over the paper to just catch the raised portion.  You want the

    snake skin look to stand out.  Heat dry to set ink.

4. Brush glossy water base varnish over the whole and let dry.

The dark brown border in the center of the snake skin is from an EK Success punch.

The outer border is a decorative scissors.

The card base is a light biege parchment paper that has all the edges sponged with dark

brown ink.

Keep It Simple

 Two versions of the same design.

The first is in cream and dark green,

while the second is in white and blue.

The embossing folder paper was first cut to

5.25 x 4 inches and then embossed.

Next it was layered over the plain colored paper.

(the dark green and the blue)

This plain paper was trimmed to a narrow

border with a layering ruler.

I used an EK border punch for the borders.

Usually I punch them out using a narrow piece of paper

that is twice the length of the DP border,

 then cut in half and attach to each side of the border.

Now attach this to you EF (embossing folder) and

colored paper piece.  I like to make by border piece slightly 

longer than required then trim them after they are attached.

The whole is now ready to glue

to the card base.

On the green version I punched

out an Anna Griffin butterfly.

Love those butterflies.